Skip to main content
FREE Delivery!|(316) 799-3265
Delivered Gravel and Base Stone for Overland Park

Delivered Gravel and Base Stone for Overland Park

Overland Park is a large city in Johnson County. Wet low spots, downspout outlets and swales need a plan that moves water away from finished surfaces before loose rock goes down. This page covers practical base, gravel and sand choices for drainage work, driveways and outdoor projects.

Material choices for Overland Park projects

Its blended aggregate and fines compact into a firm layer for driveway rebuilds, walkways and pads. 1 Inch Minus, also known as screened base or shoulder rock, works where a compacting stone base is needed under a finished surface.

Measure length by width to get square footage, then multiply by planned depth. Convert the depth to feet before calculating cubic feet, or use the calculator for a tonnage or yard estimate. For vehicle areas, install the base in manageable lifts and compact each lift before placing the next one. A 4 to 6 inch compacted base suits many light-use drive surfaces, while heavier traffic and weak subgrade call for a deeper design.

Ground prep, frost and drainage in Johnson County

Kansas soils include expansive clay that takes on water during a wet spring and may crack during August dry periods. Sandier ground drains faster, but intense rain still moves loose surface stone. Build a compacted layer below the finish rock, shape the grade so water has an outlet, and repair soft spots before covering them.

The statewide frost-depth guide is 30 inches. Confirm required depth and project details with the local building department before installing footings, drain structures or other work affected by frost.

For a swale or low area, focus on the path water follows across the property. Keep runoff from concentrating at the edge of a gravel drive, and use enough compacted base to keep the finish layer from mixing into wet soil.

Delivery planning for Overland Park and nearby towns

Leawood in Johnson County is about 3 miles east of Overland Park, and Prairie Village in Johnson County is about 6 miles northeast. Lenexa in Johnson County is about 7 miles west, while Mission in Johnson County is about 8 miles north. Shawnee in Johnson County is about 9 miles northwest, and Olathe in Johnson County is about 9 miles west.

Addresses associated with 66204, 66207, 66210 and 66212 are among the ZIP codes listed for the city. Before scheduling, check that the delivery point has a clear approach, enough turning room and no low overhead obstructions. Mark the intended dump location, keep vehicles and equipment clear, and select firm ground that will support a loaded truck after rain.

Measure before you schedule

Use the calculator to turn project dimensions and depth into an order quantity. Place the order online and select a delivery date after the material and access plan are set.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Overland Park, KS

How do I order material and choose a delivery date?

Select the material, enter the quantity and add it to the online order. At checkout, choose a delivery date that fits the project schedule. Measure the area before ordering so the selected amount matches the planned depth.

What should go around a French drain or downspout outlet?

Use 1 Inch Clean, also called #57 limestone or clean rock, around perforated drain pipe and at outlets where water needs open spaces to move through the stone. Place filter fabric between the stone and surrounding soil where soil migration is a concern. Keep the outlet path open so water does not back up toward the structure.

How can I keep a Johnson County gravel drive from rutting in spring?

Remove weak, wet material from rutted sections and restore the drive's crown so water leaves the surface. Add AB-3 in compacted lifts to rebuild the supporting layer, then place the selected driveway surface. Fix drainage first, because loose gravel pressed into saturated soil will rut again.

What ZIP codes are listed for Overland Park?

The listed ZIP codes are 66204, 66207, 66210, 66212, 66213, 66214, 66221, 66223, 66224 and 66251. Use the delivery address during checkout to match the material order to the project location.

Nearby