Skip to main content
FREE Delivery!|(316) 799-3265
Gravel and Aggregate Delivery in Coats, KS

Gravel and Aggregate Delivery in Coats, KS

Kansas Rock Supply handles gravel and aggregate delivery in Coats, KS for two kinds of buyers: contractors building drives and pads, and homeowners patching a lane or dressing a bed. AB-3 is the Kansas name for dense-graded crushed limestone base, and it is where most ground work here starts.

This part of the state sits on sand, gravel and silt laid down by the Arkansas River. That ground drains fast, which changes which material belongs on top of it.

Materials for Coats Projects

Base and driveway surfacing carry the weight of the work around here, so start there. AB-3, also called AB3 or aggregate base, is crushed rock and fines graded roughly 1 1/2 inch down.

It locks up tight when it is moisture-conditioned and rolled, which makes it the material for driveways, parking pads, shed and shop bases and road shoulders.

If a full AB-3 base is more than the job needs, 1 inch minus is the smaller dense-graded crushed limestone. It tops a drive, patches soft spots and builds up shoulders.

1 Inch Minus is not the same material as AB-3, even though the two are close cousins.

For a finished surface over a compacted base, Driveway Gravel is the surfacing choice, and Walkway Gravel gives garden paths a finer, comfortable surface underfoot.

Washed stone is the other half of the picture. In Kansas, clean washed limestone is sold by inch size and called clean rock.

1 Inch Clean, also called #57 stone or clean limestone, goes into French drains, foundation drains, pipe bedding and construction entrances.

Sand and soil round out a project. Washed Sand, also called concrete sand or river sand, beds and levels under slabs and pavers and mixes into concrete.

Top Soil builds new lawns and levels beds over heavy clay or thin rocky ground.

Ground and Conditions in Coats

Start with where the water goes. Across the Arkansas River Lowlands and the south-central sand prairie, the ground is sand, gravel and silt laid down by the Arkansas River, with stabilized dune sand and a sandy loam over the top of it.

Sand drains fast, and that sounds like good news until a surface course with no binding fines sinks straight into it. The water table also sits close under parts of the valley floor.

A drive or pad needs a base that binds, not loose stone that disappears into the sand below it.

Wind moves loose sand as soon as the cover is broken. Spring high water scours banks along the rivers in this part of Kansas.

That is where rip rap earns its place, armouring stream banks, pond banks, ditch lines, culvert outlets and slopes against flash runoff.

Winters here are moderate by Kansas standards. Freeze and thaw cycles are shorter than in the north but still enough to move a drive that has no proper base under it.

Frost depth is set by the local building official, not by a single statewide figure.

The working season is long. Wet spring weeks and high summer heat are the limits, and sandy ground is back in shape quickly after rain.

Delivery to Coats and the Surrounding Area

Bulk material arrives by dump truck and tips in one pile on site. Have the drop spot clear and reachable before the truck gets there, with room for the pile to sit where you want to work from.

You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout. Each product page has a calculator if you want help sizing the load.

Coats sits in Pratt County, and delivery covers the county, including Pratt, Iuka, Sawyer and Byers.

Questions About Ordering in Coats

Do you supply contractors working in Coats?

Yes. Kansas Rock Supply delivers bulk aggregate to contractors and homeowners alike in Coats and across Pratt County.

You order online by the ton or by the yard, and a dump truck tips the load on site. AB-3 for drives and pads, clean rock for drainage, sand and topsoil for the finish work all come the same way.

Do you deliver AB-3 to Coats, KS?

Yes. AB-3 is the Kansas name for dense-graded crushed limestone base, and it is available for delivery in Coats and the surrounding county.

It suits driveways, parking pads, shed and shop bases and road shoulders. Choose your quantity by the ton or yard when you order online, and pick a delivery date at checkout.

Order Aggregate for Your Coats Project

Kansas Rock Supply delivers AB-3 and 1 inch minus for drives, pads and shoulders, clean washed stone for drainage, sand and topsoil for beds and lawns, and river rock for decorative work in Coats and across Pratt County. Order online by the ton or yard and set your delivery date at checkout.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Coats, KS

Do you supply contractors working in Coats?

Yes. Kansas Rock Supply delivers bulk aggregate to contractors and homeowners alike in Coats and across Pratt County. You order online by the ton or by the yard, and a dump truck tips the load on site. AB-3 for drives and pads, clean rock for drainage, sand and topsoil for the finish work all come the same way.

Do you deliver AB-3 to Coats, KS?

Yes. AB-3 is the Kansas name for dense-graded crushed limestone base, and it is available for delivery in Coats and the surrounding county. It suits driveways, parking pads, shed and shop bases and road shoulders. Choose your quantity by the ton or yard when you order online, and pick a delivery date at checkout.

Where will the material be placed?

Wherever you tell us, as long as the truck can safely reach it. Mark the spot before the delivery and someone should be on site to point the driver to it. If nobody can be there, leave clear instructions when you order and we will follow them.

Nearby