Skip to main content
FREE Delivery!|(316) 799-3265
Bulk Aggregates for Drainage in Downs, KS

Bulk Aggregates for Drainage in Downs, KS

Kansas Rock Supply brings gravel and aggregate delivery in Downs, KS, and drainage is the job that comes up first. Silty upland soil crusts over and sheds water, and the chalk and shale beneath it sits close to impervious.

So storm water has nowhere to go. Washed stone gives it a place: clean rock for French drains, drywells and downspout runs, and AB-3 for the drives and pads that need a base under them.

Materials for Downs Projects

Start with clean washed limestone. Water moves through it instead of pooling on top.

It is sold by inch size here, so you pick the size that fits the drain, not a blend.

For a French drain or a drywell, 1 Inch Clean is the standard open stone. It is also what pipe bedding and construction entrances call for.

#4 Crushed Stone handles heavier drainage and trench bottoms where a larger clean stone is wanted.

A downspout run or a tighter drainage bed takes a smaller stone. 3/4" Crushed Stone works for drainage beds and trench backfill, and 3/8" Crushed Stone covers fine drainage and pipe bedding.

For a general drainage product, Drain Rock is washed rock sold for French drains, dry wells and foundation drains.

Dense-graded material is the other half of the work. AB-3 is the Kansas name for dense-graded crushed limestone base, crushed rock and fines graded roughly 1 1/2 inch down, and it locks up tight when it is moisture-conditioned and rolled.

Driveways, parking pads, shed and shop bases and road shoulders all start there.

1 Inch Minus is the smaller cousin, for topping a drive, patching soft spots and building up shoulders. RipRap armours stream banks, pond banks, ditch lining, culvert outlets and slopes against flash runoff.

Delivery to Downs and the Surrounding Area

You order online. Pick your material, choose a quantity by the ton or by the yard, and set a delivery date at checkout.

Each product page has a calculator if you want to size the load before you commit.

A dump truck tips the load on site in Downs. Kansas Rock Supply delivers across Osborne County, including Osborne, Natoma, Alton and Portis.

Ordering is the whole process. No counter to visit, no route to plan, no conversation needed.

Ground and Conditions in Downs

Plan around the working season. This part of Kansas runs a long dry stretch either side of a short wet spring.

Rapid drying and dust are as much of a problem as rain when you are trying to compact material.

Across the Smoky Hills, Blue Hills and Post Rock country, the ground is silty and clayey over Cretaceous rock, with loess on many of the uplands. That is tight ground that does not absorb water quickly, which is why a clean stone drainage layer earns its place here.

Wind and water both work on exposed ground. Silt blows, and short intense storms gully bare slopes.

RipRap on a bank or a culvert outlet is doing real work, not decoration.

Winters are cold and dry with sharp temperature swings. Repeated freezing and thawing loosens compacted surfaces and heaves gravel drives.

Frost depth is set by each jurisdiction, so check the figure that applies where you are building.

Order Bulk Aggregate for Downs

Kansas Rock Supply delivers washed stone, AB-3, rip rap and the rest of the bulk line to Downs and across Osborne County. Pick your material, choose your quantity by the ton or the yard, and set a delivery date at checkout.

Order online and the truck brings it out.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Downs, KS

Do you deliver AB-3 to Downs, KS?

Yes. Kansas Rock Supply delivers AB-3 to Downs and the rest of Osborne County, along with Osborne, Natoma, Alton and Portis. AB-3 is the dense-graded crushed limestone base used for driveways, parking pads, shed and shop bases and road shoulders. Order it online, choose your quantity by the ton or yard, and pick a delivery date at checkout.

What gravel is best for a driveway in Downs?

Start with AB-3 for the base. It is crushed limestone with the fines left in, graded roughly 1 1/2 inch down, and it locks up tight when it is moisture-conditioned and rolled. Top it with 1 Inch Minus if you want a smaller dense-graded surface, or with Driveway Gravel to surface an existing drive.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.

Nearby